FINE MATERIAL WASHERS

Effective washing of natural and crushed materials.

FINE MATERIAL WASHERS

Fine material washers, also frequently named dewatering screws are utilized to clean and dewater fine aggregates typically minus 10 mm or 5 mm (3/8’’ or 4 mesh) to fine tune end products to meet specifications and to separate water soluble clay, silt, and micro sized fine particles. Available in both single and twin screw configurations, fine material washers are most often used after a wet screening operation to process products such as concrete, mason, mortar.

EFFECTIVE WASHING OF NATURAL AND CRUSHED MATERIALS

MEKA Fine Material Washers are accomplished by hydraulic separation; using water to clean and classify by weight. Larger particles (Sand) weigh more so they sink and are collected in the bottom of the trough. They are discharged by steel spiral shaft with replaceable polyurethane or cast steel linings. The smaller lighter unwanted particles are floated to the surface and discharged over the weirs at the lower end of the machine.

Capable of producing high capacities, fine material washers deliver extreme productivity. High efficiency single or dual drives result in low power requirement, thus reducing operating costs while increasing throughput. A large capacity pool and adjustable speed control via sheave changes ensures a steady and consistent flow of fine aggregate peoducts. Available in both single and twin screw configurations, fine material washers are most often used after a wet screening operation to process products such as concrete, mason, mortar.

TECHNICAL SPECIFICATIONS

Have a look at our range of fine material washers with detailed technical data below. Feel free to contact us if you require more specific information or a unique solution for your needs. Our engineers will be happy to assist with your project.

FINE MATERIAL WASHER TECHNICAL SPECIFICATIONS

SINGLE SCREW

metric imperial	MFWS 0976	MFWS 1010	MFWS 1197
Diameter x Length (mm) Diameter x Length (inchxfeet)	917x7620 36x25	1000x10000 40x33	1120x9700 44x32
Capacity (mtph) Capacity (stph)	100 110	150 165	175 192
Material (mm) Material (inch)	10 3/8"	10 3/8"	3/8"
Power (kW) Power (HP)	11 15	22 30	18,5 25
Screw (rpm) Screw (rpm)	21 21	17 17	17 17
Weight (kg) Weight (lb)	6500 14300	10500 23200	10500 23200

DOUBLE SCREW

metric imperial	MFWD 0880	MFWD 0976	MFWD 1197
Diameter x Length (mm) Diameter x Length (inchxfeet)	800x8000 32x26	917x7620 36x25	1120x9700 44x32
Capacity (mtph) Capacity (stph)	200 220	200 220	350 385
Material (mm) Material (inch)	10 3/8"	10 3/8"	10 3/8"
Power (kW) Power (kW)	2x15 2x20	2x11 2x15	2x18,5 2x25
Screw (rpm) Screw (rpm)	21 21	17 17	17 17
Weight (kg) Weight (lb)	7700 17000	11300 24900	18900 41700

“ Results may vary depending on feed material gradation, density, silt & clay content, amount of water used, equipment settings and washing application.“

FINE MATERIAL WASHER PDF, 3.1 MB

LEARN MORE ABOUT THE PRODUCT

Didn’t find what you are looking for? Feel free to get in touch with us. Just call +90-312-397-91-33 and we will help you in any way we can. You can also send an e-mail to [email protected], or fill in the inquiry form if you would like to pass us a detailed inquiry or project information. Use the Call Back option if you would like to be contacted by our sales team.

CALL BACK INQUIRE NOW

Share your phone number, call you!

FINE MATERIAL WASHERS